|
|
| |
|
|
|
|

|

|
Click to enlarge image
|
Model Number |
Series HGD-1 |
System Features
- Alarms presence of target gas (Chlorine, Sulfur Dioxide or Other)
- Up to Four Sensors Input
- Field-programmable Alarms and Range-Setting
- Long Life of Sensers : 2 years expected
- Alphanumeric Display of Gas Concentration
- Simple & Fast Calibration in Engineering Senses
- Integral Audible and Visual Alarms
- 4-20 mA DC Output and Contact Output
- Battery Back-up (Optional)
Calibration
Field calibration of the HGD-1 is ultra-simple. A special program feature in the indicator allows the operator to perform field calibration from the operator keypad using only a simple voltmeter and a 4-20 mA DC signal generator. Whether calibrating electrically or using a calibration gas, there is no need to open the instrument to accomplish the calibration work.
Specification
Gas sensor
|
Type
|
Electrochemical |
|
Enclosure
|
NEMA 4X |
|
Dimensions
|
4" wide x 4" high x 2" deep |
|
Range
|
0.1 to 30.0 PPM CI2 or SO2 field selectable |
|
Temperature
|
-20 to +50±C |
|
Pressure
|
Ambient +/-10% |
|
Power
|
12 VDC from alarm indicator unit |
|
Sensor Resolution*
|
0.1 PPM CI2 0.5 PPM SO2 |
|
Sensors available for other gases. Consult factory.
|
Alarm Indicator Unit
|
Enclosure
|
NEMA 4X (IP65) |
|
Dimensions
|
6.5" wide x 6.5" high x 5.5" deep |
|
Analog Output
|
Isolated 4-20 mA DC |
|
Digital Output
|
RS232; RS485 optional |
|
Power Requirement
|
120/240 VAC, 50/60 Hz, single phase |
|
Display
|
16-character x 2-line LCD, backlit |
|
Alarms
|
Three, programmable |
|
Alarms Contacts
|
Gold, 1.2A@120Vac |
|
Memory
|
Non-volatile EEPROM |
|
Data & Command Entry
|
Front mounted keypad, 4 tactile feedback pushbuttons |
|
|
|
|
| |
|
|
|